Ideal for all types of after-pour applications, such as hardeners, colourings, and light reflective coatings
Precision Multi-Material Spreader
The Morrison Spreader is ideal for all types of after-pour applications, such as hardeners, colorings, light reflective coatings, etc.
This model works with powder-based materials and trap rock with aggregate up to 3/8″ (9.5 mm) in size. Superior material control is achieved with our independently controlled flow rate and hopper travel speed. The spreader is easily assembled and can be configured to suit your needs.
Powered by a Honda GX160.
- Available in 2.5′, 5′ and 10′ (0.7, 1.5, 3 m) sections.
- Material flow is adjustable from 2 ounces to 3 pounds (0.05 to 1.4 kg) per square foot.
- Bridge section weighs only 7 lbs (3.2 kg) per foot. Hydraulically agitated hopper weighs 308 lbs (140 kg).
- Flow rate control is independent from hopper travel speed.
- Hopper height is adjustable from 2″ (5.0 cm) to 18″ (45.7 cm) over slab.
- Bolted construction makes on-site length changes and adjustments quick and easy using everyday tools.
- Metered flow valve assures precise application of expensive toppings.
- The MS40 is capable of spanning slabs from 10′ (3 m) to 75′ (23 m).
TECHNICAL SPECS
Capacity
4.5 cubic ft (127 l)
Maximum Load
600 lbs. (272 kg)
Engine
5.5 hp Honda
Discharge Height
Adjustable from 2″ (5.0 cm) to 18″ (121.9 cm)
Discharge Width
48″ (122 cm)
Weight Hopper
461 lbs (210 kg)
2.5′ (0.7 m) section
25 lbs (11 kg) 55″
5′ (1.5 m) section
42 lbs (19 kg)
10′ (3 m) section
81 lbs (37 kg) (76 cm)
Span
up to 75′ (23 m) 14′ to 79′
