Long Working Time, Quick Curing and Low-Odor Polyaspartic –
LABFAST LO is a low-odor, two-component (1A:1B) high solids polyaspartic coating, non-yellowing, commonly used with vinyl flakes. The colored LABFAST LO serves as the base coat, while the clear version used as a protective topcoat, both sharing a common hardener.
| LABFAST LO |
Working time* |
Tack Free* |
Viscosity (cps) |
VOC | Abrasion ASTM D4060 (1000 cycles) |
Delta E |
|---|---|---|---|---|---|---|
| 85- | 15 min | 45 min | 300 +/-50 | 169 g/l | 30 mg | <2.0 |
| 85+ | 25 min | 1 h 15 | 300 +/-50 | 169 g/l | 30 mg | <2.0 |
| 85 XT | 30 min | 1 h 30 | 300 +/-50 | 212 g/l | 30 mg | <2.0 |
| 90- | 15 min | 45 min | 500 +/-50 | 122 g/l | 30 mg | <2.0 |
| 90+ | 25 min | 1 h 20 | 500 +/-50 | 144 g/l | 30 mg | <2.0 |
* 22°C / 72°F and 50% Rel. Hum.
Two high-solids versions are available, 85% and 90% solids.
LABFAST LO 85 offers three variations:
- LABFAST LO 85-: Ultra-Fast Set
- LABFAST LO 85+: Prolonged Working Time
- LABFAST LO 85 XT: Extra Working Time
LABFAST LO 90 offers two variations
- LABFAST LO 90-: Ultra-Fast Set
- LABFAST LO 90+: Prolonged Working Time
Both, LABFAST LO 85 and LABFAST LO 90 provide optimal work time/cure time ratio. The short curing time, with a tack free in as low as 45 minutes*, allows the installation of a full floor system in one single day, with rapid return to service. The product displays excellent curing capability even at very low temperature levels. This product offers superior mechanical and chemical properties and is low maintenance. It also displays a superior aesthetic finish and excellent UV stability which makes it ideal for interior and exterior applications. We recommend the utilization of the LABTEC Vinyl Chips in combination with LABFAST/LABSHIELD ECO products. Two or three-coat systems can be considered.
See respective TDS’s for more details.
* Depends on R.H. and temperature levels
2-Gallon Kit = 1 x A (1 Gal) + 1 x B (1 Gal)
10-Gallon Kit = 1 x A (5 Gal) + 1 x B (5 Gal)
Recommendations for Light Traffic
| 2-Coat System | 3-Coat System | |||||||
| Product | Mix Ratio | Working Time | Tack Free | Base Coat + LABTEC Chips |
Top Coat | Base Coat 1 | Base Coat 2 + LABTEC Chips |
Top Coat |
|---|---|---|---|---|---|---|---|---|
| LABFAST BASIX | 1A : 1B | 25 min | 55 min | 8 – 13 mils | 8 – 13 mils | 4 – 9 mils | 4 – 9 mils | 8 – 13 mils |
| LABFAST 85 LO- | 1A : 1B | 15 min | 45 min | 8 – 13 mils | 8 – 13 mils | 4 – 9 mils | 4 – 9 mils | 8 – 13 mils |
| LABFAST 85 LO+ | 1A : 1B | 25 min | 1 h 15 | 8 – 13 mils | 8 – 13 mils | 4 – 9 mils | 4 – 9 mils | 8 – 13 mils |
| LABFAST 85 LO XT | 1A : 1B | 30 min | 1 h 30 | 8 – 13 mils | 8 – 13 mils | 4 – 9 mils | 4 – 9 mils | 8 – 13 mils |
| LABFAST 90 LO- | 1A : 1B | 15 min | 45 min | 8 – 13 mils | 8 – 13 mils | 4 – 9 mils | 4 – 9 mils | 8 – 13 mils |
| LABFAST 90 LO+ | 1A : 1B | 25 min | 1 h 20 | 8 – 13 mils | 8 – 13 mils | 4 – 9 mils | 4 – 9 mils | 8 – 13 mils |
| LABSHIELD ECO – | 2A : 1B | 15 min | 1 h 10 | 8 – 13 mils | 8 – 13 mils | 4 – 9 mils | 4 – 9 mils | 8 – 13 mils |
| LABSHIELD ECO + | 2A : 1B | 25 min | 1 h 45 | 8 – 13 mils | 8 – 13 mils | 4 – 9 mils | 4 – 9 mils | 8 – 13 mils |
