HIGH-TORQUE DRILLING, REAMING AND DRIVING UNITS
Corner Drills and Bridge Reamers
- Small side-to-side distance for working in tight spaces
- Self-closing roll throttle
- Built-in oiler for motor
- Ideal for bridge reaming and drilling applications
Non-Reversible Specs
| Model No. |
Morse
Taper
|
Drilling
(in steel)
|
Reaming
(in steel)
|
Torque
Output
(ft./lbs.)
|
Load
Speed
(RPM)
|
Motor
Power
(HP)
|
CFM at
90 PSI
|
Length
|
Weight
(lbs.)
|
|---|---|---|---|---|---|---|---|---|---|
| 2 1602 0030 | #1 | 5/8″ | 1/2″ | 7 | 500 | 0.7 | 21 | 12.5″ | 7 |
| 2 1701 0030 | #2 | 7/8″ | 5/8″ | 35 | 270 | 1.8 | 49 | 20.9″ | 19 |
| 2 1801 0030 | #3 | 1-1/4″ | 1″ | 53 | 260 | 2.6 | 63 | 22.5 | 25 |
- Model No. 2 1602 0030 has a 3/8″ NPT air inlet. A 1/2″ (13mm) hose is recommended.
- Model No. 2 1701 0030 has a 3/4″ NPT air inlet. A 1/2″ (13mm) hose is recommended.
- Model No. 2 1801 0030 has a 3/4″ NPT air inlet. A 5/8″ (15mm) hose is recommended.
Reversible Specs
| Model No. |
Morse
Taper
|
Drilling
(in steel)
|
Reaming
(in steel)
|
Tube
Rolling
Cap.
|
Torque
Output
(ft./lbs.)
|
Load
Speed
(RPM)
|
Motor
Power
(HP)
|
CFM at
90 PSI
|
Length
|
Weight
(lbs.)
|
|---|---|---|---|---|---|---|---|---|---|---|
| 2 2104 0030 | #4 | 2-1/8″ | 2″ | 2″ | 86 | 180 | 3.0 | 71 | 23.8″ | 37 |
A 5/8″ (15mm) hose is recommended for model 2 2104 0030.
