With extra features like a built-in temperature control thermostat, digital temperature read-out and an error indicator read-out, this heater is a reliable source of heat for a comfortable work environment.
Motor: Heavy-duty, cast aluminum enclosed electric motor
Burner Head: 1-piece cast aluminum
Components: Components: Built-in temperature control thermostat with control dial · High performance fan · Integral overheat and flame-out safety · Fuel gauge · Sure start ignition for cold temperature starts · Dual connector ignition · Pneumatic tires
Factory Tested for Multiple Fuels: Kerosene · JP8/Jet A fuel · No. 1 or No. 2 fuel oil · No. 1 or No. 2 diesel fuel
Important Notes:
- Not for use in residential living areas or inadequately ventilated areas.
- Proper ventilation required during operation.
- Must be plugged into an approved standard electrical outlet for operation.
Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.
Please see heater “Owner’s Manual” included with each heater for a complete list of important safety information. These specifications are estimates only.
Specifications:
| Heat Output | 400,000 BTU |
|---|---|
| Hot-Air Flow | 1,400 CFM |
| Air Pump Pressure | 125 PSI |
| AC Power | 120V, 60Hz, 3.0 Amps |
| Motor Size | 1/2 HP |
| Fuel Tank Capacity | 24.0 gallons |
| Fuel Consumption | 3.00 gal./hr. |
| Max. Operating Hours | 8.0 hours |
| Heating Area | 10,000 sq. ft. |
| Multi-Fuel Capable | Yes |
| Digital Temp. Read-Out | Yes |
| Error Indicator Read-Out | Yes |
| Parts Storage System | Yes |
Weights & Dimensions:
| Net Weight | 150.00 lbs. |
|---|---|
| Shipping Weight | 159.00 lbs. |
| Length | 53.00 in. |
| Width | 30.00 in. |
| Height | 36.00 in. |
