This 1.5 HP bag-filter dust collector offers 1,300 CFM of suction—more than some 2 hp models can provide. A bargain for hobbyists, the DC-1300B cyclone dust collector will keep your workspace clean.
- 1.5 HP dust collector runs on 110-volt power. Plug it into any standard outlet.
- 30-micron filters on the upper and lower bags remove dust particles from your shop.
- Filtration system will improve your air quality, protecting your lungs.
- Single 6” x 4” port lets you connect a hose.
- Hook the portable dust collector up to one woodworking machine at a time and eliminate buildup so that your equipment lasts longer.
- You also can use this small dust collector like a vacuum. Take it around the shop with a hose connected to suck sawdust up from the floor.
- Swiveling casters on the base allow you to conveniently move the machine.
- This dust collector will give you a neater shop than you could maintain with an ordinary shop vacuum alone.
- Quick and easy to set up: you can get this dust extractor up and running in 1 hour and 30 minutes or less.
- Covered by a 1-year parts warranty.
- Includes lifetime technical support by phone from our team of experienced woodworkers.
Recommended for: small home shops.
| Item Number | DC-1300B |
|---|---|
| Shipping Weight | 180lbs |
| CFM | 1300 |
| Dust Collection Port | 6″x 4″ |
| Number of Outlets | 2 |
| Drum Capacity (Gallon) | 30 |
| Power | 110V |
| Horse Power | 1.5 |
| Noise Level ( @ 3 meters) | 80dB |
| Shipping Dimensions (Inches) | 48x45x28 |
* specifications subject to change without notice.
