Need a budget-friendly jointer to cut 8”-wide lumber into flat pieces? The IJ-875 shows why long bed jointers are so popular: easy material handling and improved accuracy.
- 2 hp motor is robust enough to tackle hardwoods.
- Straight 3-knife cutter head spins at 5,600 rpm.
- Runs on 220-volt single-phase power.
- Classic wedge bed design has stood the test of time and proven itself a reliable choice for any shop.
- Sturdy 8” x 72” oversized table, mounted on dovetailed ways, includes a built-in rabbeting ledge.
- 4.75” x 38” fence has 90° and 45° right and left stops for straight cutting and edge joining.
- Adjustment wheel on the on the infeed table allows for fast setups and lets you control the cut depth up to the 1/8” maximum.
- 4” dust port can conveniently connect to a standard dust collector to suck up sawdust and clean your shop.
- Comes standard with a magnetic starter switch that turns the machine off if there’s a loss of power. It would cost a lot to add this safety feature to a different machine!
- Covered by a 1-year parts warranty.
| Item Number | IJ-872 |
|---|---|
| Shipping Weight | 600lbs |
| Dust Collection Port | 4″ |
| Table Size (Length) | 72″ |
| Table Size (Width) | 8″ |
| RPM | 5600 |
| Fence Size | 4-3/4″ x 38″ |
| Maximum Rabbeting Capacity | 1/2″ |
| Cutter Head Diameter | 3-1/4″ |
| Max Stock Width | 8″ |
| Number of Knives | 3 |
| Jointer Maximum Cutting Depth | 1/8″ |
| Power | 220V Single Phase |
| Horse Power | 2 |
| Weight (lbs) | 450 |
| Rabbet Ledge | 3-1/2″ x 8-5/8″ |
| Shipping Dimensions (Inches) | 82x44x42 |
* specifications subject to change without notice.
